Because the display screen of iPhone 6 plus has been enlarged to 5.5 inches, the opportunity of breaking it has also been enlarged. If unfortunately you broke your iPhone 6 plus display, official restore will price you up to per week exclude the time you make the appointment. So if you're skilled enough, replacing the iPhone 6 plus broken screen yourself is a better choice. Here we will stroll you through a 5 minutes DIY restore information for replacing the damaged iPhone 6 plus damaged screen.

Cracked the iphone 7 plus touch screen Kit 6 display? No fear! Just comply with this step-by-step iPhone 6 display screen substitute guide, it is only a ten mins work!

Please notice: This process was carried out by our consultants who have years of expertise of take apart phones, and we used the part which already have these small elements pre-assembled. This post is certainly not a reference for those who are skilled sufficient to repair their iPhone 6+, do that at your personal risk, etradesupply is not going to be answerable for any injury occurred during the restore course of.

Instruments Wanted:
Pentalobe Screwdriver
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Device
Case Opening Instrument

Step 1. Shut down your iPhone 6 plus before you do anything else. (Be certain you’ve performed this earlier than the disassembly begins, or it's possible you'll trigger quick circuit of the internal elements of the cellphone which can harm the motherboard)

Step 2. Undo 2 screws on the bottom with the assistance of the Pentalobe Screwdriver. (We advocate you to make use of a magnetic pad for putting those screws in case shedding them)

Step 3. Stick the suction cup on the underside of the phone after which pull out the broken screen. (If your display screen has already shattered badly, use transparent adhesive tape to cowl the floor of the screen to avoid any additional injury)

Step 4. Undo 5 screws holding the metallic cowl, then take the metallic cover out.

Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, front dealing with camera connector and dwelling button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD screen meeting with dwelling button, frame and entrance facing digicam, then you definitely simply want to place the brand new one on)

Step 6. Undo the three screws holding the home button retaining bracket then pick it up.

Step 7. Pry up the home button flex cable connector then take away the house button.

Step 8. Undo the three screws that holding the steel cowl on the ear speaker.

Step 9. Take out the retaining bracket, ear speaker and front dealing with digital camera.

Step 10. Undo the 7 screws that locking the LCD metal plate.

Step 11. Pry up the LCD again plate connector.

Step 12. Change your broken display screen with the brand new one.

Observe: We strongly recommend you to check the perform of the brand new iPhone 6 plus digitizer and LCD display screen assembly before you set up it on. For those who sadly get the defective part, you could possibly ask your supplier to trade for a new one.